Call 1-800-382-1200
Shopping Cart
0 items - $0.00
Toll Free: 1-800-382-1200 Español
Payment Plan
Now In: Dent RepairPaintless Dent RepairGlue Pulling Dent Repair → Dent Fix Ultra Ding Massager Glue Pulling Kit - DF-DM555UDX
Dent Fix Ultra Ding Massager Glue Pulling Kit - DF-DM555UDX

Dent Fix Ultra Ding Massager Glue Pulling Kit - DF-DM555UDX

Dent Fix Ultra Ding Massager Glue Pulling Kit - DF-DM555UDX

Dent Fix
Price: $376.99
Free PDR Striped Yellow Ding Board with Purchase of the Ding Massager Deluxe Pulling Kit
While Supplies Last

Eliminate dings and small dents from OEM paint with the Dent Fix Ultra Ding Massager Glue Pulling Kit. In case you do not have access to the back panel, you will need a glue puller to carry out PDR repair. It works efficiently on motorcycle gas tanks, aluminum panels, stainless steel panels, and cosmetic car panels.

This handy kit from Dent Fix Equipment comes with a slide hammer for enabling a power-packed pull on thicker metals. A squeezer puller works with a massaging action to let go of tension in the metal. As a result, you get a faster and more successful pull. The included hot glue is specially formulated for enhanced adhesion. While the glue has a strong adhesive action, you can remove it easily with the use of a release agent.

This kit is an upgrade from the DF-DM550DX Ding Massager Deluxe Kit

Kit Includes:
  • Squeeze puller
  • Slide hammer
  • 120V glue gun
  • Plastic scraper stick
  • (10) glue sticks
  • NEW T-Puller
  • NEW Knock down tool with (2) heads (pointed and rounded)
  • NEW (15) different pulling nibs, which are redesigned to provide the technician with more choices and nib surfaces for better fitment, which improves grip when repairing the many varieties of dings and minor dents, from small to large.
  • Blow molded case
How to use the Dent Fix Ultra Ding Massager Glue Pulling Kit
  • Thoroughly clean the area that needs to be pulled, and the bottom surface area of the nib, making sure they are free of wax, dirt or grease. You can use a rubbing alcohol or release agent.
  • Plug in the glue gun and insert a glue stick in the gun. Let the glue gun come to a suitable temperature.
  • Choose the right size of pulling nib. Use a small nib for smaller dents and a large one for larger dents.
  • Gently push the trigger on the glue gun to apply glue to the entire bottom surface area of the pulling nib.
  • Apply the nib with glue to the area that needs pulling, without pressing the nib too hard. Leave about 1/8" of glue between the panel and the nib. Hold the nib in this position for about 10 to 20 seconds, allowing the glue some time to set. It will cool and completely set in 2 to 3 minutes.
  • Using a slide hammer, squeeze puller or T-puller, pull the plastic nibs once they are glued to the panel. A soft pull is good to start with, and you may gradually increase the force. A fast and forceful pull will either break the nib or release the bond prematurely.

Customer Reviews
# of Ratings: 3
1. on 8/18/2016, said:
worked as advertised
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
Showing comments 1-1 of 1