Call 1-800-382-1200
Shopping Cart
0 items - $0.00
Toll Free: 1-800-382-1200 Español
Payment Plan
Now In: Dent RepairFinishing Glazes & Putty → 3M Acryl-Green Spot Putty, 14.5 oz tube - 05096
3M Acryl-Green Spot Putty, 14.5 oz tube - 05096

3M Acryl-Green Spot Putty, 14.5 oz tube - 05096

3M Acryl-Green Spot Putty, 14.5 oz tube - 05096

SKU:    3M-05096
Price: $18.99

Looking for the perfect product for spot repairs, pinholes, stone chips, and surface imperfections? Try the 3M Acryl-Green Spot Putty 14.5 oz tube. This fast-drying formula is perfect for such projects. It has a smooth texture and is easy to spread on the affected areas.

Since it is easy to use, work time is typically 1.5 minutes. When applied in a thickness of 1/16" or less, with an ideal room temperature of 72ºF, the putty will dry within 25 minutes. Since it dries quickly, it can be sanded within 10 to 15 minutes. 3M Acryl-Green Spot Putty, 14.5 oz Tube works best over primer or polyester body fillers and can also be used on clean and sanded painted surfaces.

Special Features of 3M Acryl-Green Spot Putty, 14.5 oz Tube

  • Perfect for spot repairs, pinholes, stone chips, surface imperfections
  • Green colored product, available in a 14.5 oz. tube
  • Fast-drying formula for quick completion of projects
  • Smooth texture makes it easy to spread
  • When applied at a thickness of 1/16”, it will dry within 25 minutes, ideally at a room temperature of 72ºF
  • Works over primer, polyester, clean, and sanded painted surfaces

Directions for Use:

  • Do not apply when ambient temperatures are below 55°F or above 110°F. Use in a well ventilated area away from sparks or open flame. (Do not apply material below the water line unless top coating.)
  • For best results apply only over clean primed surfaces. (Use compressed air to remove any dust contamination).
  • Apply using a plastic or metal spreader pressing the putty firmly into the imperfections; keep the application thickness to 1/16" or less. Apply in thin coats instead of one thick application.
  • Allow to dry prior to sanding. Sand (wet or dry) using 3M™ abrasives in the following sequence: P180, P220, P320. Note: As with any putty, longer drying times will occur with high humidity, thick applications and low temperatures.
  • Re-clean surface prior to priming or top coating. (Follow paint manufacturer's recommendation for priming and top coating).


PDF Safety Data Sheet

PDF Technical Data Sheet


Customer Reviews
# of Ratings: 0
There are no comments for this product. CLICK HERE to be the first one to share your opinion!