View Cart
Adding to cart
0
Toll Free: 1-800-382-1200

3M™ Perfect-It™ III Trizact™ Spot Repair System

For Spot and Small Panel Repair

Step 1

Sanding
To remove nibs, runs, or sags
Sand with DA or by hand With DA: 3M™ Hookit™ II Finishing Film Discs - Grade P1500

-OR-

By Hand

3M™ Imperial™ Wetordry™ Paper Sheets Grade P1500, 3M-02023

Step 1: Sanding

Step 2

Scratch Refinement
For fresh and cured clear coats use a spray bottle, apply enough water to dampen the 3M™ Trizact™ abrasive. Sand damp with DA until grade P1500 sand scratches are removed. Surface should appear semi- polished.

Note: When sanding contours, use interface pad.

Step 2: Scratch Refinement

Step 3

Machine Glazing
To remove 3M™ Trizact™ sand scratches (Grade 3000) and swirl marks Apply medium pressure.

To polish:
Apply light pressure. Suggested buffer speed: 1800 RPMs.

  • 3M™ Perfect-It™ Backup Pad, 3M-05718 Use with 3M™ Superbuff™ Adaptor, 3M-05710
  • 3M™ Perfect-It™ 8" Foam Polishing Pad, 3M-05725
  • 3M™ Perfect-It™ III Trizact™ Machine Glaze

Step 3: Machine Glazing

Step 4

Paint Protection
Apply finishing glaze and make one pass with DA. Do one panel at a time.

  • 3M™ Perfect-It™ Hookit™ II Foam, DA Glazing Pad
  • 3M™ Perfect-It™ III Finishing Glaze
  • Wipe clean immediately with 3M™ Perfect-It™ Perfect-It™ III Detailing Cloths, 3M-06016

Step 4: Paint Protection

For safety always wear goggles and face shield when grinding or sanding.

The Only Paint Finishing System Officially Licensed by NASCAR.

PageType: "topic"