This universal wiper puller uses two different rod puller designs based on the type of wiper and cowling is on the vehicle.

1. Simply use the correct set of rods and slid them along the horizontal shaft to the appropriate ... 

Removing a wipe arm that has been fixed to the car for years can be a real challenge. To prevent galling car manufactures use different metals on the wiper post then on the arm which over time can fuse them together. Glass Technology's m... 

• Heavy duty construction.
• Tool has a 1-3/4" opening between the pressure bolt and the prong jaws.
• Entire assembly is made of steel with the prong jaws and upper bolt support being a 1/4" thick with radiused connect... 

• Model Specific Wiper Arm Removal Kit has a different puller for each type of vehicle and the puller contacts as much of the arm as possible to spread the removing pressure out over a large area.
• Alfa-Romeo, Audi, BMW, Cit... 

• With Equalizer's® wiper arm removal tool, you can place the prongs under the arm (use care not to hook the wiper post) then place the pressure bolt over the head of the windshield wiper bolt and screw the pressure bolt do... 

• Entire tool is made of hardened steel for durability and long use.
• Each tool contains two sets of interchangeable jaws.

To Use:

• Set the wiper puller arms on the horizontal slide.... 

• To use the Equalizer® wiper arm puller to remove the wiper nut, slide the tool over the arm until the jaws touch the wiper post, then turn the T-handle clockwise until the wiper arm pops from the wiper post. 
• War... 

• Designed to remove aluminum arm from steel stud, which often galvanizes and locks arm and stud together.
• Investment cast design is strong, easier to use—saves time
• Live center end allows for more ...