Two-component epoxy (2:1) structural adhesive for use in automotive bonding applications. Adheres to a wide variety of properly prepared substrates including steel and aluminum; most commonly used in structural applications such as reinforcements and frame components.
The Impact Toughened Structural Adhesive has an extended work time for large applications but can be accelerated with applied heat.
- Optimum impact strength than traditional structural adhesives
- Can be used in weld bonded or rivet bonded OEM applications
- Outstanding performance in extreme temperatures (-40°F through 140°F)
- Consistent bond line thickness contained by glass beads
Work Time: 90-minutes
Clamp Time: 10 hours
Size: 220mL
For use on outer body panels only. Not for use on structural components such as pillars, frame rails, core supports, or rocker panels (on unibody vehicles).
Times will increase as temperatures decrease. Times shown above are at 77°F/25°C. Full cure time is 24 hours, but this may be accelerated with heat.
