Two-component epoxy (2:1) adhesive designed to bond steel and aluminum auto parts and body panels to each other and to metal frames (no primer required). Can also be used to bond SMC, FRP and Fiberglass components.
- Minimal odor
- Glass beads for proper spacing
- Easy to sand formulation
- Paintable
- Seals and bonds in one step
Work Time: 30-minutes
Clamp Time: 2 hours
Sanding Time: 3 hours
Paint/Cure Time: 24 hours
Size: 220mL
For use on outer body panels only. Not for use on structural components such as pillars, frame rails, core supports, or rocker panels (on unibody vehicles).
Times will increase as temperatures decrease. Times shown above are at 77°F/25°C. Full cure time is 24 hours, but this may be accelerated with heat.
