Kirker Ultra-Glo Acrylic Urethane - Pure White - UA-81030

Review star icon Review star icon Review star icon Review star icon Review star icon (1 review)
SKU #KIRK-UA-81030
Price:
This item can only ship by ground within the Continental US. Next Day or 2nd Day, AK, HI, & International delivery not available.
$62.99
  • Description
  • Recommended Accessories
  • Reviews
  • Tech Sheets
  • 3/4 Gallon - Pure White
  • Formulated as a high gloss, premium paint designed for automotive and fleet refinishing
  • Superior gloss retention
  • Durable finish - resistant to UV, weather, chips
  • Mix ratio - 3:1, add one quart of activator (sold separately) to one 3/4 gallon of color
  • No reduction necessary, however if used, Kirker recommends the mix comprise no more than 10% reducer
  • At 68°F, should be set to the touch within 20 minutes and dry within one hour
  • 2.8 VOC meets even the most stringent regulations
  • Made in USA

Color sample shown for visual purposes only and is not 100% color accurate due to varying monitors/printers. Color sample chart available upon request.

This item can only ship by ground within the Continental US.
Next Day or 2nd Day, AK & HI, & International delivery not available.

WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Kirker Ultra-Glo Urethane Activators

SKU #KIRK-UA-1600
• Activator for Kirker ULTRA-GLO Series
• Use Medium Speeds for 80° and below
• Use Slow Speeds for 80° and above
Price:
$10.99

Kirker Ultra-Glo Urethane Reducers

SKU #1700847
• Aids in sprayability
• Use fast for temps below 70°F
• Use Medium for temps between 70-80°F
• Use Slow for temps above 80°F
Price:
This item can only ship by ground within the Continental US. Next Day or 2nd Day, AK, HI, & International delivery not available.
$45.99
Write a Review

Reviews

1 review
Review star icon Review star icon Review star icon Review star icon Review star icon
Professional opinion of Kirker paint
By Joseph Ottati on Sep 19, 2020
Used the Kirker Ultra Glow Pure white with Medium activator. Painted with Kirker for the first time. I used it to paint the complete right side if a Yukon XL to include door handles, moldings and mirror (all small parts pulled off vehicle). I used a downdraft spray booth and Sata Jet 3000 HVLP gun with 1.4 tip. I reduced the paint slightly. I used Kirker prep wash. Used 320 grit to sand the vehicle. The results: it flows smooth when reduced (don't over reduce, you'll get runs). A 1.4 fluid tip is a must, anything smaller is to fine for single stage and will require over reducing. Any thicker of a tip and the paint texture will be too much. It laid out smooth, good gloss hold out. It filled the 320grit scratches with ease, it had complete color coverage in 2 coats (I did 4 coats because I plan on sanding and buffing the vehicle). No solvent pop, no hazing. It flashes off very fast, but don't put the coats on too fast, you don't want to trap solvent. I think it's good quality paint. I will use it again. If Auto body tool mart allowed pictures with reviews, I'd post some.

Close
Sign up for our Email Newsletter
  
Auto Repair Customer E-Catalog

By using this website, you agree to our use of cookies to analyze website traffic and improve your experience on our website. Learn More