Lord Fusor Direct to Metal Sealer Adhesive
• Available in neutral or black
- Tech Sheets
- Non-sag adhesive strength for trim bonding
- Duplicates a factory appearance on standing seams, truck bed seams, tooled door skin seam, and more!
- Weld-thru with no burn back
- UV resistant
- Suggested applications: standing seams, cosmetic seams, truck bed seams, tooled door skin seams, floor pan seams, core support seams, brushed seams and other applications in which a non-sag cosmetic seam sealer is required
- 9.5 oz
- Available in: Neutral and Black
- Skin Time: 25 min.@ 70 °F (21 °C), 50% RH
- Paint Time @ 70°F: immediately or up to 30 days without a scuff
- Cure Time: 72 hr.@ 70 °F (21 °C)
* Through cure may vary depending on temperature and humidity. Product cures 1/8 inch every 24 hours. Product thickness will determine full cure time.
WARNING: This product can expose you to chemicals including Diisononyl phthalate (DINP) which is known to the State of California to cause Cancer. For more information go to www.P65Warnings.ca.gov.