The Evercoat Finish Sand 4:1 is a hybrid polyester primer surfacer that dries with little to no surface texture. With a direct to metal application, this eliminates the need for epoxy or self-etch primers. This waterborne compatible primer surfacer is easy to mix accurately, even without a scale. It is VOC compliant.
The Evercoat Finish Sand 4:1 utilizes patented technology to provide a smooth and low texture finish. It is perfect for holding down problematic repairs on a wide variety of substrates. It passes 500 hours in salt spray tests and can be applied over properly sanded and cleaned bare metal. It works great on substrates like fiberglass, SMC, rigid plastics, bare metal, aluminum, and body filler or putty. Must be catalyzed with 733 Polyester Primer Catalyst # 0121
Key Features of the Evercoat Finish Sand:
- Little to no surface texture
- Eliminates need for epoxy
- Easy mixing without a scale
- Waterborne compatible
- VOC compliant
- Mixing Ratio: 4:1
- Color: Gray
- Boiling Point: 133 - 293 °F
- Vapor Density: Heavier than air
- Specific Gravity: 1.38 lb. per gal.
- Melting Point: -13 °F
- Physical State: Liquid
- Odor: Sharp, aromatic odor
- Solubility: Soluble
*This item can only ship by ground within the Continental US.
Next Day or 2nd Day, AK & HI, & International delivery not available.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.