The CamAir® DAD-PRO™ Desiccant Air Drying System provides worry free air filtration for top-quality paint jobs. Air enters the 2-stage filtration package where it is purged of water, oil and oil aerosols. Once cleaned, the air enters the desiccant tank to further remove any remaining water vapor.
- First stage filter removes oil, water and dirt down to 5 microns
- Second stage coalescer removes oil vapors and dirt particles down to .01 microns
- Desiccant tank removes water vapor and humidity down to a dew point of 40° F
- Desiccant is easy to replace
- Cartridge indicator: green is good, yellow needs to be changed
50 SCFM Water Separator Features:
- Aircraft aluminum filter heads, outer tube are anodized for extra corrosion resistance
- Spiral design stainless steel mesh uses centrifugal force to flush any remaining liquids to the outer tube for draining.
- Oversized inner barrel functions as the filter "drip leg"
- Low maintenance float drain
50 SCFM Oil Coalescing Filter Features:
- Aircraft aluminum filter heads, outer tube are anodized for extra corrosion resistance
- Element: 100% borosilicate glass microfibers are bonded together with a resin binder
- Low maintenance float drain
Technical Specifications
- Air Inlet: 1/2" NPT (Female)
- Air Outlet: 1/4" NPT (Male)
- Air Flow Capacity: 30 CFM
- Max. Operating Pressure: 175 PSI (12 Bar)
- Max. Temperature: 150°F (65.6°C)
- Humidity Indicator: Green- OK, Yellow- Replace Desiccant
- Water Vapor Removal: -40°F Dew point
- Partical Removal: .01 micron
- Manual Drain: Included
Free shipping applies to the 48 continental states only.
