BendPak Extra-Tall 18,000 Lb. Two Post Clearfloor Super-Duty Lift - XPR-18CL-192

The BendPak 18,000 Lb. Two Post Clearfloor Super-Duty Lift - XPR-18CL has an 18,000-lb. capacity and features an additional 24" up top for servicing taller, "Sprinter" delivery, service and transportation vehicles. The XPR-18CL-192 features dual "direct-drive" low-pressure cylinders that minimize leakage and reduce the workload placed on the entire hydraulic system. For added safety this lift features auto shutoff - A rigid, padded safety shutoff bar automatically stops the lift should a vehicle come in contact with overhead structure.

THe XPR-18CL-192 provides the clearfloor convenience - allows your techs to move tools and equipment freely underneath a raised vehicle. This lift is built with single piece columns for extra strength while under heavy loads and bolt-on column extensions for increased overhead clearance for work on larger vehicles. The dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition. The free-flow, high-pressure 3/8" hydraulic lines, a high-flow pump and integrated AC power-unit. This lift is finished with a durable powder coating.

The BendPak 18,000 Lb. Two Post Clearfloor Super-Duty Lift - XPR-18CL-192 fits in shops with ceilings higher than 16 feet.

• Replaces Bendpak XPR-18C Two-post Lift
• 18,000-lb. lifting capacity
• Padded overhead safety shutoff bar
• Taller column height provides greater overhead clearance
• Single-point safety release
• Drop-end arms provide a lower pad height
• Dual hydraulic direct-drive cylinders
• Oversized 53" tall carriage for superior strength and durability
• Electric / hydraulic power system
• Oversized A36 steel base plate
• Self-lubricating dura-glide UHMW polyethylene bearing system
• Safety locks in each column spaced every 3"
• Two-stage telescoping front and rear arms
• Automatic arm restraints
• Heavy-duty 1/2" aircraft-quality equalizer cables
• 6" diameter machined steel cable sheaves reduces cable fatigue
• ALI certified
• CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
• Includes: 8-piece truck and van adapter set, frame cradle pads, round rubber contact pads

Technical Specifications

• Lifting Capacity: 18,000 lbs.
• Height Overall: 192.7"
• Width Overall (Outside of Base Plate): 155"
• Width (Outside of Columns): 144"
• Floor To Overhead Switch: 187.7"
• Inside Columns: 120"
• Reach (Front Arm Min.): 39"
• Reach (Front Arm Max.): 60"
• Reach (Rear Arm Min.): 39"
• Reach (Rear Arm Max.): 60"
• Min. Pad Height: 5"
• Rise: 69"
• Max Lift Height (Pad Only): 74"
• Max Lift Height (6" Adapter): 80"
• Drive-Thru Clearance: 106"
• Motor: 220 VAC / 60 Hz. 1Ph
• Time of full Rise: 45 Seconds
• Max Load Per Arm: 4,500 lbs.

*Shipping Information:

• Additional $80 charge for residential delivery.
• Forklift required to remove Lift from delivery truck.
• $100 Limited Access Fee for deliveries to schools.