Reflective markings to retrofit one trailer up to 48 feet. Highlyreflective, even up to 90 degree angle. Quick and easy to apply withfull seven year warranty. DOT-C2 certified. Exceeds NHTSA DOT-C2 certified and guaranteed to meet or exceed all NHTSA requirements High-brightness
- 75 feet continuous roll, enough to mark one trailer up to 48 feet
- One roll 2 inch x 25 yards, red and white reflective tape
- Four 2 inch x 12 inch white strips.
3M™ Diamond Grade™ Conspicuity Markings Series 983 and 3M™ FlexiblePrismatic Conspicuity Markings Series 963 are highly reflective and arepre-coated with an aggressive pressure sensitive adhesive forapplication to most clean, dry, wax-free, non-corroded, weatherresistant surfaces. The adhesive is protected by an easy-release liner.3M™ conspicuity markings are intended to be applied to the side andrear perimeter of vehicles in a continuous stripe to enhance visibilityand recognition by motorists.
Markings can be applied to flat surfaces(with and without rivets) and non-compound curved surfaces with aradius greater than 5 inches. For application to corrugated vehicles,apply the marking to the bottom and top rails or between corrugations ifadequate flat surface is available. Application is not recommended torusted or corroded metal, loose or chalking paint, irregular shapedframework, bolts, rivets larger than 1/2 inch high, support plates,corrugations, within 1/8 inch of door hinges, exterior posts, weldjoints, the end of the vehicle surface, or within 3 inches of mandatedlights, reflectors, or turn signals.