Call 1-800-382-1200
Login/Create Account
Shopping Cart
0 items - $0.00
Toll Free: 1-800-382-1200 Español
Free Shipping
Now In: → U-Pol Gravi-Gard Anti Stone Chip - UP0731
U-Pol Gravi-Gard Anti Stone Chip - UP0731

U-Pol Gravi-Gard Anti Stone Chip - UP0731

E-mail this product to a friend E-mail this product to a friend

U-Pol Gravi-Gard Anti Stone Chip - UP0731

SKU:    UPOL-UP0731
Price: $10.59 

Tough, hard, durable coating designed to reproduce the manufacturers original stone chip finish.

U-Pol Gravi-Gard Anti Stone Chip is super tough and durable and is designed to recreate the original chip finish on vehicles. The chip finish can wear away with years of use and this product will efficiently restore manufacturer quality chip finish on your vehicle.

You can use the Gravi-Gard on different vehicles to provide superior protection from stone chips, salt, moisture, and even rust. It also can considerably reduce road noise and vibrations and is considered one of the best products available for application onto car panels. You can also use it inside the engine compartment. View the Repair Process Guide for more information. The special formula can help cover most weld marks and seams with just one coat.

The Gravi-Gard comes in an easy-to-use aerosol formula. The liquid also has a fast-drying feature that you can overcoat quickly, to make your work quicker, while keeping the quality of the final finish intact. View the Technical Data Sheet.

Available in 500 ml aerosol cans, the Gravi-Gard can be used on substrates like prepared, primed, or bare metal, and aluminum. It is recommended to use an etch primer when using the anti stone chip on aluminum. It is compatible with fully painted surfaces too. View MSDS

How to Apply U-Pol Gravi-Gard Anti Stone Chip

  • Clean and degrease the old paint surfaces with a good quality spirit or thinner
  • Use 400 grade paper
  • Re-clean and dry well
  • Shake the can before use, this will ensure efficient spraying
  • When applying thick coats, allow at least 10-15 minutes flash time
  • Drying time is approximately 2 hours at normal room temperature
  • Drying time is 30 minutes when baked at 180ºF (the drying time is dependent on the thickness of the film, temperature, and humidity
  • The Gravi-Gard is compatible with most paint systems
  • It is recommended to use a primer for maximum gloss

This item can only ship by ground within the Continental US.
Next Day or 2nd Day, AK & HI, & International delivery not available.


Product Rating: (5.00)   # of Ratings: 1   Rate It! Click Here to rate this product

5 - Great
4 - Good
3 - OK
2 - Bad
1 - Terrible
0% 50% 100%

Sort: New to Old RE-SORT COMMENTS:

Showing comments 1-1 of 1
1. Anonymous User on 9/2/2014, said:

Hi, I did my once a year touch up on my 4WD 1995 Toyota Tacoma extra cab. I did a lite spray on the complete chassis, frame, suspension, differentials, etc. I cleaned loose rust with a wire wheel then wiped everything with a rag and mineral spirits then sprayed. The spray worked out great it comes with two nozzles one regular like a spray paint nozzle and a nozzle with a larger hole like the size of a under coating nozzle. both worked good but the larger hole nozzle sprayed thicker which was better for me and faster but the cans ran out a lot faster. I purchase 10 cans and did a complete touch up so if you are doing a complete spray and want it nice and thick get many more and if your car is bigger you will need more. It dried really fast that I could spray one side of the skid plate let it dry one hour flip it spray the other side and install it a hour later. It drys like paint with a hard coating not sticky like a tar under coating. I have already purchased 12 more cans to touch up my other cars before the difficult north New Jersey winter. Bruce
Was this comment helpful? yes no   (1 people found this comment helpful, 0 did not)
Showing comments 1-1 of 1