Transtar Finish-Tec 2K Kwik Prime, DTM, Gallon - 6441
The Transtar Finish-Tec 2K Kwik Prime, DTM, Gallon is a two-component primer surfacer that allows direct application on metal surfaces. It is a fast-drying formula that can be easily sanded, wet or dry. Kwik Prime provides corrosion-resistance and exceptional build and filling qualities. Reducing cycle times, this primer surfacer can lead to savings in labor and material.
You can use Kwik Prime on substrates such as sanded and degreased existing finishes, aluminum, steel, and galvanized. It offers good adhesion and protection when you apply it directly to bare steel.
To prepare the surface, wash it thoroughly with soap and water. Rinse well and wipe dry with a clean cloth. Use a suitable solvent to clean the surface and wipe with a clean cloth. Sand the repair area with 80-grit sandpaper and later with 120-180 grit. For application, activate primer as per the mix ratio 4:1 or 4:1:1. Remember to keep the activator closed properly to prevent moisture contamination when it is not in use. Stir properly and use a gun to apply 2-3 medium wet coats, leaving a flash of 2-3 minutes between coats.
- Size: Gallon
- Actual V.O.C.: 2.8#/gal
- Regulatory V.O.C.: 3.6#/gallon
- Category: Primer
- Color: Light Gray
- Shelf Life: 1 year
- Mix Ratio (by volume): 4:1 or 4:1:1
- Reducer Up to 20% Transtar Urethane Grade Reducer if desired
- Pot Life: 3 hours @ 70°F and 50% RH
- Viscosity: 20-25 seconds
- Coverage: 4:1 620 ft2/gallon and 4:1:1 516 ft2/gallon
This item can only ship by ground within the Continental US.
Next Day or 2nd Day, AK & HI, & International delivery not available.
Exception=Conversion failed when converting the nvarchar value 'TRE-6444' to data type int.
There are no comments for this product.