Order 8 SEM cartridges and receive a FREE Manual Applicator Gun. Click for details.
The SEM Weld-Bond Adhesive is an adhesive that uses the MMA/Acrylic technology. It exceeds FMVSS requirements and can be used to replace automotive panels, skins, and other sheet metal. It has a superior impact and extreme peel strength and fills gaps up to half an inch. It has a long work time of 45 to 60 minutes, and a cure time of 24 hours.
The SEM Weld-Bond Adhesive is a non-sag, two component methacrylate system formulated to bond metal surfaces without the use of an external primer. It allows body shops to position parts correctly for proper alignment. It contains glass beads to ensure bond line control and is easy to use. It works well on steel, galvanized steel, e-coat, aluminum and stainless steel. It ensures perfect finishes with minimal surface preparation, and is a must-have in your workshop.
Key Features of the SEM Weld-Bond Adhesive - 39537:
- MMA/Acrylic based technology
- Exceeds FMVSS 208 requirements
- Used to replace automotive panels, skins, sheet metal
- Superior impact and peel strength
- Fill gaps up to 1/2 inch
- Long work time
- Consistent bond line thickness
- Made in the USA
- Cartridge: 7 oz.
- Work Time: 45 to 60 mins
- Set Time: 2 to 3 hours
- Cure Time: 24 hours
- Heat Cure Time: 1 hour
Prep, Mixing, Application & Cleanup Instructions
Safety Data Sheet
This item can only ship by ground within the Continental US.
Next Day or 2nd Day, AK & HI, & International delivery not available.