SEM Metal Bite Finishing Glaze - 39592
Prevents staining and seals the repair area
Quickly fill sand scratches and other minor imperfections with SEM Metal Bite. It is a two-component polyester finishing glaze. Apply with putty spreader; film build should not exceed 1/8". Then allow the area to cure 10-15 minutes and then sand with 180 grit sand paper.
- Fast-drying light blue formula dries to a tack-free finish
- Excellent adhesion
- Recommended for use on aluminum, steel, SMC and fiberglass
- Sold in 24 oz tubes
- 24 oz. tube
- Color: Light blue
- Working Time: 3-5 min. @ 100 grams
- Sand Time: 10-15 min.
Prep, Mixing, Application & Cleanup Instructions
Safety Data Sheet
There are no comments for this product.