Free T-Shirt with the purchase of $75.00 worth of Klean-Strip products
While supplies last
The Klean-Strip Aircraft Peeler Clearcoat & Basecoat Remover is a specially formulated remover that is used on vehicles that have delamination problems, that is, the top coat of paint is separating from the original factory applied primer. It pops factory delamination and faulty bases, and works with no sanding. It removes clear and base coats in five minutes and gives clear finishes in less than one minute. It works on the spray on, blow off technique, and does not harm the OEM primer. It meets the requirements of CPSIA (Consumer Product Safety Improvement Act).
The Klean-Strip Aircraft Peeler Clearcoat & Basecoat Remover removes defective top coats quickly and easily, and can be dried off with an air hose. To start using this product, first mask the seams and trim openings to prevent bleed-back stripping of new finish. Then shake the can well and hold it in an upright position, pointing the arrow on top of the button away from you. Spray at a distance of approximately 8" to 12" from the surface. To avoid sagging on vertical surfaces, use a back and forth motion to apply a generous and even coat. Limit the work area to one section at a time, such as a hood.
Allow the remover to work until the finish is blistered or popped completely, usually within 5 minutes. Now remove paint by blowing with shop air, or use a flexible plastic scraper. If repeat application is required, use extreme caution, as over-application may cause damage to exposed OEM primer.
Finally, clean the surface with Prep All Wax & Grease Remover and wipe dry with a clean cloth. The surface must always be dry before applying a new finish. This easy to use remover is sure to save you a lot of time and energy, and will solve your vehicle delamination worries.
Key Features of the Klean-Strip Aircraft Peeler Clearcoat & Basecoat Remover:
- Base coat / clear coat remover
- Pops factory delamination and faulty base
- Clear finishes in less than 60 seconds
- Completely dries to the touch in minutes
- CPSIA compliant
- Size: 18 oz. aerosol can
- Item Weight: 18 oz.
- Product Dimensions: 9" x 3" x 3"
This item can only ship by ground within the Continental US.
Next Day or 2nd Day, AK & HI, & International delivery not available.