Fusor Direct to Metal Sealer Adhesive
Single component direct-to-metal - no substrate primer required
- Non-sag adhesive strength for trim bonding
- Duplicates a factory appearance on standing seams, truck bed seams, tooled door skin seam, and more!
- Weld-thru with no burn back
- UV resistant
- Suggested applications: standing seams, cosmetic seams, truck bed seams, tooled door skin seams, floor pan seams, core support seams, brushed seams and other applications in which a non-sag cosmetic seam sealer is required
- 9.5 oz
- Available in: Neutral and Black
- Skin Time: 25 min.@ 70°F (21°C), 50% RH
- Paint Time @ 70ºF: immediately or up to 30 days without a scuff
- Cure Time: 72 hr.@ 70°F (21°C)
* Through cure may vary depending on temperature and humidity. Product cures 1/8 inch every 24 hours. Product thickness will determine full cure time.
|9.5 oz. - Neutral
|9.5 oz. - Black
Exception=Conversion failed when converting the nvarchar value '6676-1' to data type int.
There are no comments for this product.