Looking for a high-performance paint for your body shop? Try the Finish 1 Hi-Lite Blue Pearl to achieve a brilliant glossy finish and absolute metallic control.
The special 3.5 VOC-compliant acrylic enamel is easy to apply and offers high gloss and metallic control. The color sample on your screen or monitor is not 100% accurate. So contact us for free color chips if you are unsure. We also offer Factory Color Matching services through Sherwin-Williams.
For best results, mix four parts of the Finish 1 Hi-Lite Blue Pearl with 1 part hardener. Apply a minimum of 2 medium wet coats or as required for even covering. For HVLP applicators, adjust the air pressure to 10 psi and for conventional gravity feeds, 40-45 psi.
Standard medium wet coats take approximately 30 minutes to dry in a dust-free environment at 70° F. The drying process can be reduced to 20 minutes when force dried at 120° F. Make sure each coat is allowed to flash dry and is slick to the touch before applying the next coat.
When air-dried at room temperature, wait for at least 24 hours before buffing. You can buff it 30 minutes after force drying. Quick buffing of metallic colors can cause unwanted streaking.
- Apply 2 medium wet coats or until uniform color is achieved
- Allow each coat to flash until handslick
- Adjust air pressure to 10 psi HVLP
- Adjust air pressure to 40-45 psi conventional gravity feed
- Out of Dust – 30 minutes @ 70° F
- To Deliver – Overnight
- 30 minutes at 120° F surface temperature
- Air Dry – After 24 hours
- Force Dry – 30 minutes after cool down
*Buffing of Metallic Colors may cause streaking. Only a light polishing of metallic colors is recommended.
Prep, Mixing, Application & Cleanup Instructions
Environmental Data Sheet
This item can only ship by ground within the Continental US.
Next Day or 2nd Day, AK & HI, & International delivery not available.