Call 1-800-382-1200
Login/Create Account
Shopping Cart
0 items - $0.00
Toll Free: 1-800-382-1200 Español
3 Payment Plan
Now In: Dent RepairBody Fillers → EverCoat Z-Grip Non-Clog Lightweight Filler - 282
EverCoat Z-Grip Non-Clog Lightweight Filler - 282


EverCoat Z-Grip Non-Clog Lightweight Filler - 282



E-mail this product to a friend E-mail this product to a friend

EverCoat Z-Grip Non-Clog Lightweight Filler - 282

Evercoat
SKU:    FIB-282
Price: $33.29 
Quantity:   

The EverCoat Z-Grip Non-Clog Lightweight Filler is a Metalworks product that has ZNX-7 to provide good adhesion and feather-edging on metals like bare steel, galvanized steel, and aluminum that have undergone corrosion treatment. It can be used along with other Metalworks products, and it will maintain corrosion warranties. This lightweight filler has a smooth and creamy texture that enables it to spread well. Vacuum processing increases shelf life and diminishes the appearance of pinholes.

This clog-free formula provides enhanced sanding due to Hattonite content and does not clog sandpaper. Use it for heavy filling and it can also repair damaged panels up to a depth of 1/4". It allows for quick cutting of abrasives, thus cutting down labor costs. This lightweight filler includes a blue cream hardener. It comes in a .8 gallon (3 liters) can.

Key Features of the EverCoat Z-Grip Non-Clog Lightweight Filler:

  • Tack-free and lightweight body filler
  • Clog-free formula improves sanding
  • Exceptional featheredge adhesion
  • Prevents peel back in the course of sanding
  • Contains Hattonite for quick and superior sanding
  • Enables optimal adhesion to substrates like galvanized steel, bare steel, aluminum, SMC, and E-coats
  • Blue cream hardener included
  • Vacuum processed to minimize pinholes
  • .8 gallon (3 liters) can

Documents:

This item can only ship by ground within the Continental US.
Next Day or 2nd Day, AK & HI, & International delivery not available.

43


Product Rating: (4.67)   # of Ratings: 3   Rate It! Click Here to rate this product


5 - Great
4 - Good
3 - OK
2 - Bad
1 - Terrible
0% 50% 100%

Sort: New to Old RE-SORT COMMENTS:

Showing comments 1-3 of 3
1. jeremy on 8/2/2016, said:

I have used this filler for more than 10 yers and have never had a failure of any kind. this is way better than any of the dynatron or other cheap fillers, good for aluminum and all other metals. great price
Was this comment helpful? yes no   (0 people found this comment helpful, 0 did not)
2. Anonymous User on 7/30/2014, said:

In response to the guy who said it got hard. It should get hard. You need to get on the filler at the exact right time for optimal cutting. The idea is to "shape" the filler as it is hardening. By the time you are done "shaping", the filler should be hard. Remember, there is a fine line of when you are able to get on the filler. If you get on it too soon, it will roll off and plug your paper. When you get on it just right, it is kind of like grating cheese, but you will have to clean the paper a couple of times with high-pressure air. Waiting for the filler to get completely hard before sanding is not a wise choice.
Was this comment helpful? yes no   (3 people found this comment helpful, 0 did not)
3. Anonymous User on 7/27/2013, said:

It is fairly hard to sand. Cures to a pretty hard consistency, even when mixed and applied correctly.
Was this comment helpful? yes no   (2 people found this comment helpful, 1 did not)
Showing comments 1-3 of 3