Evercoat Quantum1 Small Repair Fast Cartridge

Evercoat Quantum1 Small Repair Cartridges

Evercoat Quantum1 Small Repair Cartridges

Quantum1 is Evercoat's first single step body repair technology. Its self leveling formula is specially engineered to fill smaller, single panel repairs and eliminates the
need for finishing putty. Dispensing and mixing is made easy with the unique two component cartridge. Never guess again how much catalyst is the right amount.
Quantum1 utilizes patent pending 10:1 technology that is the successful integration of polyester and epoxy chemistries. As a result, Quantum1 has less shrinkage, better
sandability and better repair quality than traditional body fillers and putties. Quantum1 also passes 500 hours salt spray (ASTM B117) and is compatible with HAPS-compliant and waterborne coatings.

Features:

Eliminates finishing putty from the repair process. Saves time and money by simplifying the repair process using less sandpaper
Easy sanding. Saves time by eliminating coarse grit sand scratches that need to be removed prior to applying primer.
Unique two component cartridge simplifies mixing by dispensing repair compound and catalyst at proper 10:1mix ratio. Eliminates guessing how much catalyst to
use for proper mix ratio saving users time.
Product is available in two speeds!
- 6700-F (470) Fast for conditions below 80°F/27°C
- 6700-S (474) Slow for conditions above 80°F/27°C)
Saves money lost to reworking failed repairs due to over or under catalyzed filler or putty.

Approves Substrates:

Steel
Galvanized Steel
Aluminum
SMC
Fiberglass (cosmetic repairs only)
For structural repairs prone to high degrees of stress and flexibility, use a fiber reinforced filler such as Everglass®, Kitty Hair® or Fiber Tech®.

Preparation:

Clean and degrease the entire panel to be repaired with soap and water, followed by wax and grease remover or cleaning solvent. Thoroughly dry surface before repairing.
Remove base coat with 80 grit or finer sandpaper. Small repairs may be sanded with 180 grit.
Use 180 grit sandpaper to featheredge the paint.

Mixing:

Cartridge w/ Ratio Check Tip
Insert ratio check tip and equalize the cartridge (Included with cartridge)
Dispense material onto mixing board.
Fold catalyst into material until uniform color is achieved.

Application:

Apply in thin layers and spread smoothly from edge-to-edge over the entire repair area. (Do not blob on or apply all at once as this causes pinholes)
To ensure best adhesion apply firm pressure with spreader when applying.

Finish:

Ready to sand in approximately 10-12 minutes if using 6700-F (470) or 15-20 minutes if using 6700-S (474), change in air temperature will impact dry to sand time.
Sand hardened material with 180 grit sandpaper.
DA sand and featheredge with 180 grit or finer. This will provide a smoother finish and reduce the number of coats of primer required for a quality finish.

Specifications:

Appearance
- 6700-F (470): White and blue colored paste
- 6700-S (474): White and red colored paste
VOC
- Packaged: 1.19 lbs/gal (143 g/L)
- Applied: 1.00 lbs/gal ( 120g/L)
Weight per Gallon 8.50 lbs/gal (1.019 kg/L)
Gel Time
- 6700-F (470): 3-4 minutes
- 6700-S (474): 4-5 minutes
Sand Time
- 6700-F (470): 10-12 minutes
- 6700-S (474): 15-20 minutes
Shore D Hardness: 60 (24 hour cure)
Max Recommended Thickness (sanded): 1/4 inch

6700-F (470) MSDS

6700-S (474) MSDS

This item can only ship by ground within the Continental US.
Next Day or 2nd Day, AK & HI, & International delivery not available.

Product	SKU	Price	Order
Fast Speed Cartridge - 470	6700-F	Price: $16.99	Quantity:
Product	SKU	Price	Order
Slow Speed Cartridge - 474	6700-S	Price: $16.99	Quantity: