Equalizer® Razorback™ Replacement Blade for Pinchweld Cleaning System
Razorback™ Replacement Blades for pinchweld cleaners come in the following widths:
- 1-1/4” Blade - BT639
- 1” Blade - BT638
- 3/4” Blade - BT637
- 1/2” Blade - BT636
With the round sharpening stone you can keep the blades sharp even into the rounded corners. All the pinchweld cleaners and sharpening stone fit neatly into a canvas pouch that folds over at the top of the tools and seals tightly closed with a Velcro® latch.
The Razorback™ is designed to cure a multitude of problems. The blades are ground with a slight back-angle that keeps you from scratching the bottom or sides of the pinchweld. This allows you to leave a small amount of urethane on the pinchweld, as recommended by urethane manufacturers. The corners are rounded so they will not scratch the bottom corner of the pinchweld. On some vehicles the headliner lays against the windshield just below the pinchweld. Often the headliner overlaps onto the pinchweld and is stuck in place with urethane. By using the proper width blade, Razorback™ can trim up against the headliner and leave the old urethane attached to the headliner.
|1/2” Blade - BT636||EQU-BT636||Price: $6.96||
|3/4” Blade - BT637||EQU-BT637||Price: $6.96||
|1” Blade - BT638||EQU-BT638||Price: $6.96||
|1-1/4” Blade - BT639||EQU-BT639||Price: $6.96||
- Suggested Products
- Similar Products
- People Who Bought This Also Bought