Call 1-800-382-1200
Login/Create Account
Shopping Cart
0 items - $0.00
Toll Free: 1-800-382-1200 Español
Now In: American MadeDent Repair Tools → The Dent Fix Maxi-Multiple Pull Resistance Welder - DF505
The Dent Fix Maxi-Multiple Pull Resistance Welder - DF505

The Dent Fix Maxi-Multiple Pull Resistance Welder - DF505

E-mail this product to a friend E-mail this product to a friend

The Dent Fix Maxi-Multiple Pull Resistance Welder - DF505

Dent Fix
SKU:    1532
Price: $1,224.99 
or 3 payments of $408.33 details

Auto body experts use the Dent Fix Maxi-Multiple Pull Resistance Welder for mending different car/automobile panels that need pulling or repairing. This high-quality welder uses 220 volts and does not overheat like other 110-volt versions.

A 220-volt plug is not included with the unit; however, most hardware stores carry it. It comes with a 21-foot power cable, which you can use to connect to the plug. This versatile tool can be used in many ways, to pull small dents and shrink the stretched metal with minimum ancillary damage to the panels. Stand Sold Separately Here

You can use this welder for welding a slide hammer to the panel, by using a light pulling rod, and a wiggle wire for pulling out creases. A wiggle wire is a high-strength conductive wire that you can weld into the dent over a series of points. A hook or any other pulling mechanism is then connected to pull along the creases from the panel. 

The wiggle wire can then be pulled off the panel, without leaving any holes often associated with older methods. It also gives you the chance to apply heat to specific spots, especially when working on older panels. The heated tool can shrink the metal and restore it to its original shape without using fillers and excessive hammering. 

View and download the Instruction Sheet, explore the Lease to Own, monthly payments as low as $25.57 and Refer for a Lease Application to learn more about the purchase/lease procedures.

Technical Specifications

  • Weight: 67.5 lbs
  • Dimensions: 20" x 10" x 14"
  • Three-year warranty

The Complete Dent Fix Maxi-Multiple Pull Resistance Welder Kit Includes:

  • Maxi 220 volt unit
  • (2) Light pull rods
  • (2) Slide hammer rods with weight
  • Pin electrode
  • Shrinking electrode
  • Wiggle wire tip
  • Leverage puller
  • Nine-finger bear claw (a four finger claw is available for a limited time only after you return the warranty card to the factory)
  • 50 stud weld pins
  • 1 pound wiggle wire
  • 21ft power cable
  • 9ft welding cable

NOTE: Due to  varying 220 outlets this unit is delivered without 220 plug. 220 volt plugs are available at most hardware stores.


Product Rating: (0.00)   # of Ratings: 0   Rate It! Click Here to rate this product

There are no comments for this product. CLICK HERE to be the first one to share your opinion!