Col-Met is an industry leading engineering company that designs paint booths with a wide range of applications. Their booth configurations are devised to deliver a clean, safe and productive working environment. The paint booths have been built with premium components and delivered with all the required hardware for quick and easy installation. Col-met works really hard with us to make sure that your needs are met regardless of the application. Col-met delivers paint booths fast and with excellent technical support to get your paint booth up and running.
The Semi-Down Draft Booth intakes fresh air from the cleaner upper levels of the shop through a filter bank located in the booth ceiling, near the product doors. The filtered air is drawn down through the booth to an exhaust filter system at the opposite end.
The booth is constructed from 18 gauge prime quality galvanized steel. All panels and support members are precision punched for easy nut and bolt assembly. Windowed personnel access doors are pre-hung in a heavy gauge galvanized steel frame for easy installation. Doors are field hung on slotted hinges to facilitate installation on uneven floors. The booths get illumination from four-tube, 48” long 32-watt fluorescent light fixtures. The light fixtures are inside access light fixtures for easier access. The booth is also equipped with a 30” diameter tubeaxial fan with aluminum spark-proof blades. Interlocked to the exhaust fan and air supply is an air solenoid valve for the spray application equipment.
External dimensions: 26'4" long x 14'6.5" wide x 11'2" high.
Large interior space: 24' x 14'0" x 9'0" inside - Big enough for vans.
Vehicle door clearance: 9'4" wide x 8'10.5" high.
All panels are air-tight, 18 gauge galvanized prime steel fastened with 5/16" bolts.
All panels have 2" flanges with pre-punched holes for easy nut-and-bolt assembly.
Gabled roof design gives better air flow, lighting and overall strength.
Ten 48" four-tube fluorescent light fixtures with clear, tempered glass and seals. Lights are easily accessible from the inside of the booth - bulbs are included.
30" diameter tubeaxial fan with aluminum spark-proof blades.
Fan motor is 3 phase 3 Hp 208/240/480 volt, 1320 r.p.m. at 12,600 c.f.m. @1/2" Static Pressure (single phase optional). ETL Model - 2Hp, 12,600 c.f.m. @ 1/2" Static Pressure.
Air solenoid valve shuts air off when door is opened. (optional)
Booth uses 20" x 20" x 2" intake filters and exhaust filters.
Windowed Personnel Access Door
Equipped with Dwyer manometer draft gauge for exhaust filter monitoring.
Meets NFPA 33 & OSHA 1910 guidelines (check your local codes for local permit requirements)
All quality components proudly made in the USA!
This product ships by truck freight. You will be contacted with shipping charges before your order is processed.