- Big Champ Pulling Post Instruction Manual
Skyhook Hinge Bracket
Page 2 of 2
5. Position hinge bracket over top
of post and line up hole on bottom of bracket with pivot at rear of post.
6. Insert bolt and nut through this
hole. Use the same bolt and nut removed in step 3. (GO TO STEP 3)
7. Using the same two wrenches as in step 3 (GO TO STEP 3),
tighten the bolt and nut securely in place.
8. Tighten the bolt located on the
front of the hinge bracket securely. The bracket is now installed.
1 of 2
Champ Manual Table of Contents