Call 1-800-382-1200
Login
Shopping Cart
0 items - $0.00
Toll Free: 1-800-382-1200 Español
Chilton
Now In: Metal Shaping Tools → Bullseye Picks - Champ
Bullseye Picks - Champ


Bullseye Picks - Champ


Bullseye Picks - Champ

Champ Frame Equipment

 

 

Repair dents on automobile surfaces like a professional with Bullseye Picks that are available in three sizes. These picks work well for metal finishing on areas around a weld seam, particularly on fabricated body work. Use a bullseye pick to make metals straight quickly and accurately in blind areas. With a choice among three throat depths of 15", 20" and 30", these picks aid restoration projects too since they can reach difficult to reach areas.

The handle of these picks is loaded with a spring to enable you to strike light blows accurately and repeatedly. It is not necessary to have a flat surface for these picks to work. You can just tilt it to the right angle that will clear an underside brace, and it will give you exceptional results. The spring-loaded handle provides a comfortable grip and returns to the open position when you release it. Besides being comfortable, the pick provides an unfailing grip to let you accomplish your tasks with precision.

The Bullseye Picks are available for individual purchase as per the size. You can purchase individually or you can buy all 3 and save!. It is now easy to get professional results on any metal finishing activity you undertake around welds when you use these sturdy picks.

Champ Bullseye Picks Sizes:

  • 15" Bullseye Pick
  • 20" Bullseye Pick
  • 30" Bullseye Pick
  • Buy all 3 and Save!

Key Features of the Bullseye Picks – Champ:

  • Gets around areas that are difficult to reach to help with repair jobs
  • Spring-loaded to return to open position after you release the pick
  • A blunt tip will prevent scratch marks on the metal part it grips, particularly aluminum
  • Comfortable grip handle
  • Powder coated metal parts
  • Available in three sizes for individual or bundled purchase

Technical Specifications

  • Throat Depth Options: 15", 20", 30"
  • Made in the USA

Product SKU Price Order
15" Bullseye Pick 1024-15
Price: $75.99
Product SKU Price Order
20" Bullseye Pick 1024-20
Price: $81.99
Product SKU Price Order
30" Bullseye Pick 1024-30
Price: $86.99
Product SKU Price Order
Buy all 3 Bullseye Picks and SAVE 1024
Price: $219.99

111

Customer Reviews
(1.46)
# of Ratings: 11
1. on 12/11/2016, said:
The 15" one is actually 18". The hinge would barely function because of paint gumming it up. The pick and eye were 1/4" offset. The welding is very poor, like nothing is jigged up before hand. Nothing is square. If this is made in USA, then give me China! Even at half price, it's not a deal, just a kit.
Was this comment helpful? yes no
(2 people found this comment helpful, 0 did not)
2. on 11/30/2016, said:
The one i received was very poor quality. Painted, not powdercoated. Finish was excessively chipped and scratched. Did not line up correctly to work properly. Plan on modifying to work if you buy.
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
3. on 7/2/2016, said:
the pick was off the bullseye by 3/4 " the powder coat look like it had been done by a third grader and for the life of me I don't know how it got past 'quality control' WILL NOT BUY AGAIN!!!
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
4. on 6/24/2016, said:
Build your own if your thinking about buying one of these. Very poor quality, the two I purchased need modified to work true,at the pivot and the head.The ones I got were not powdercoated like the description states,they have a bad oil base job on them. Don't waste your money.
Was this comment helpful? yes no
(4 people found this comment helpful, 0 did not)
5. on 11/29/2015, said:
Would not pick in the bullseye area at all, had to straighten the bent tube but then the pivot point was mis-drilled and terribly sloppy. Ended up cutting off the pivot point and rebuilding it with new steel and a better fitting bushing/hole. Now it works perfectly, picks right where it should now, no lateral movement. I'm happy with it now but you shouldn't have to rebuild a brand new tool but it was unusable the way it came.
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
6. on 12/24/2014, said:
I looked at a number of other brands but could not bring myself to pay 200 plus dollars plus shipping for the set. I obtained these Champ picks on a half price sale. They arrived with the pick end and anvil ends so far out of alignment they were not usable until I took a torch and heated and aligned the ends. One pick end was almost 3 inches out of alignment!! I would never recommend these at full price, but after I made the necessary repairs they should be usable.
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
7. on 12/21/2014, said:
Quality was a lot to be desired. The foot was welded on crooked and the foot and the pointer don't line up at all. I'll have to cut it apart and weld it back together right. I hope their all not made this bad.
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
8. on 12/18/2014, said:
this product was very low quality and I returned it. Return shipping cost me $13.00 which made this a costly mistake on choice.
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
9. on 10/6/2013, said:
The pick I received was welded crooked so the bottom & top halves didn't line up. I think I could have bent it to be straighter but it wasn't worth the effort once I looked at the rest of the construction. There is no rebound spring and the pivot bolt & ears are made so loose the pick end won't consistently close with the point in the same location on the upper foot. I'm returning the pick & I've already ordered a different brand.
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
10. on 6/13/2013, said:
Terrible quality. No spring return. No chamfer on pad so if it isn't perfectly straight on you will leave a mark from the pad. Poor initial alignment. It can be made to work with a little modification but you would hope that wouldn't be the case with a made in the USA tool.
Was this comment helpful? yes no
(0 people found this comment helpful, 0 did not)
Showing comments 1-10 of 11 (Next 10)
Click Here to see all comments