To remove nibs, runs, or sags
Sand with DA or by hand

With DA:

• 3M™ Hookit™ II Finishing Film Disks
Grade P1500, PN 1762

• 3M™ Imperial™ Wetordry™ Paper
Sheets Grade P1500, PN 4295

For fresh and cured clear coats use a spray
bottle, apply enough water to dampen the
3M™ Trizact™ abrasive. Sand damp with DA
until grade P1500 sand scratches are
removed. Surface should appear semi-
polished.

Note: When sanding contours, use interface
pad.

• 3M™ Trizact™ Hookit™ II Foam Disc
Grade P3000, PN 4424

• 3M™ Hookit™ II Soft Interface Pad,
PN 1771

To remove 3M™ Trizact™ sand scratches
(Grade 3000) and swirl marks
Apply medium pressure.

• 3M™ Perfect-It™ Backup Pad,
PN 4330*
* Use with 3M™ Superbufft™ Adaptor,
PN 4329

• 3M™ Perfect-It™ Foam Polishing
Pad, PN 4333

• 3M™ Perfect-It™ III Trizact™
Machine Glaze, PN 4423

Apply finishing glaze and make one pass
with DA. Do one panel at a time.

• 3M™ Perfect-It™ Hookit™ II Foam,
DA Glazing Pad, PN 4408

• 3M™ Perfect-It™ III Finishing Glaze,
PN 4352

• 3M™ Perfect-It™ Perfect-It™ III
Detailing Cloths, PN 4358