Home | Shop OnLine | About Us | Spray Booths | Frame Racks | E-Mail Us | Tech Info | Tutorials | Financing | Shop Talk

#4201 - CHAMP
Mobile 4 Roll Masker


Parts List

Instructions


1 - Bottom Support Base (a)
1 - Vertical Bracket (b)
1 - Long Paper Holder (c)
2 - Medium Paper Holders (d)
1 - Short Paper Holder (e)
2 - Utility Hooks (f)
2 - Wheels (g)
2 - Wheel Anchor Caps (g)
8 - 5/16 Bolts (h)
16 - 5/16 Flat Washers (h)
8 - 5/16 Lock Washers (h)
12 - 5/16 Nuts (h)

1. Attach wheels to bottom support base.  Push on wheel anchor cap.



2. Insert vertical bracket into bottom base. 
Tap in lightly with rubber mallet if necessary.


3. Attach long paper holder to vertical bracket in the bottom holes with bolts.

4. Secure to the vertical bracket with washers 
& nuts.

Repeat with the two medium paper holders.

5. Attach the short paper holder to the vertical bracket in the upper most bolt holes. Attach the two utility hooks in the holes below the short paper holder.

 

 

Your Mobile Four Roll Masker for Paper & Tape is ready for paper & tape 

Technical Info Index

2 of 3

Home | Shop OnLine | About Our Company | Spray Booths | Frame Racks | E-Mail Us| Tech Info| Tutorials | Financing | Shop Talk