3M™ Diamond Grade™ Conspicuity Marking 983-72 ES Red, 3" x 150' Roll - 67823
Highly reflective microprismatic sheeting with pressure sensitive adhesive in pre-cut strips for easy application to trucks, trailers and large vehicles.
3M™ Diamond Grade™ Conspicuity Markings Series 983 and 3M™ Flexible Prismatic Conspicuity Markings Series 963 are highly reflective and are pre-coated with an aggressive pressure sensitive adhesive for application to most clean, dry, wax-free, non-corroded, weather resistant surfaces.
- 3M™ conspicuity markings are intended to be applied to the side and rear perimeter of vehicles in a continuous stripe to enhance visibility and recognition by motorists.
- Applications: Markings can be applied to flat surfaces (with and without rivets) and non-compound curved surfaces with a radius greater than 5 inches. For application to corrugated vehicles, apply the marking to the bottom and top rails or between corrugations if adequate flat surface is available.
- 3" x 150 ft Roll
- Red Color
- Easy to release liner
- Application is not recommended to rusted or corroded metal, loose or chalking paint, irregular shaped framework, bolts, rivets larger than 1/2 inch high, support plates, corrugations, within 1/8 inch of door hinges, exterior posts, weld joints, the end of the vehicle surface, or within 3 inches of mandated lights, reflectors, or turn signals.
There are no comments for this product.